Product Center

The electric actuator is mainly used in the heating system to control the opening and closing of the pipeline. Specifically applied to electric drive part of sub-water catcher branch valve, small valve and dynamic balance valve.

Electric actuators are normally open and normally closed. Normally open (N.O.) means that the actuator control of the actuator is turned on and the power is turned off when no power is applied. Normally closed (N.C.), Refers to when the electric actuator is open, the product top of the circular parts will be raised up, you can see the working state.

Product features:

1. Wax sensor drive by PTC

2. Spring return function, in the case of shut off, the valve closed or open (normally closed or normally open type)

3. No noise working, snap-fit installation, simple and convenient, any angle rotating

4. High security, long life

5. Low power consumption

Technical data:

  .Voltage：AC220V/230V/110V/DC24V/12V                  .Thrust:110N

  .Average power：2-3W                                               .Wire length:800mm

  .Frequency：50HZ                                                      .Shell grade:IP54

  .Stroke：3-5MM                                                          .Connection size:M30x1.5mm

  .Ambient temperature：-5~60℃                                .Shell material: Reinforced nylon

Installation 1: working situation invisible:

Installation 2: working situation visible:

Notice：NC-Actuators are equipped with a red mounting split on the position indicator to secure easy valve connection.When mounted this split must be removed for correct operation.